top of page
washer-suds.jpg

Metal Roofs, a Comprehensive Roof Cleaning Guide: Tips, Techniques, and Best Practices

Updated: Feb 28, 2023

At Roof Savers LLC, we understand how important it is to keep a metal roof clean in order to maintain its appearance and longevity. This article will provide expert advice on how to clean a metal roof effectively.


What is the significance of cleaning your metal roof?



Before we get into the specifics, let's first discuss why it's so important to clean your metal roof. Dirt, debris, and other pollutants can accumulate on your roof over time, causing discoloration, corrosion, and even surface damage. Furthermore, if you have trees or other vegetation near your roof, falling leaves and branches can cause buildup and clog your gutters, leading to water damage and other issues.

Cleaning Your Metal Roof Step-by-Step


First and foremost, safety.

It is critical to prioritize safety before beginning any roof cleaning project. Assemble the necessary tools, such as a sturdy ladder, a safety harness, and non-slip shoes. It's also a good idea to have someone on the ground to help you out as needed.


Collect supplies

A few basic supplies are required to clean your metal roof effectively. A pressure washer, a cleaning solution specifically designed for metal roofs, a soft-bristle brush, and a bucket are among the tools required.


Prepare the roof.

Before applying any cleaning solution, use a broom or blower to remove any loose debris from the roof surface. This will help the cleaning solution penetrate and remove any stubborn dirt or stains.

Make use of a cleaning solution.

Following the manufacturer's instructions, apply the cleaning solution to the roof surface with a soft-bristle brush. Harsh chemicals and abrasive materials should be avoided as they can damage the surface of your metal roof.


Ensure that the roof is clean.

Allow the cleaning solution to sit for a few minutes before thoroughly rinsing the roof with a pressure washer. Use a low-pressure setting to avoid damaging the roof's surface.

Clean the gutters.

You should clean your gutters while you're cleaning your roof. Using a scoop or trowel, remove any debris from the gutters, then rinse them with a garden hose.

Check for any damage.

Examine your roof after cleaning it for signs of damage such as rust, dents, or loose screws. If you discover any issues, address them as soon as possible to prevent further damage.Examine for damage

After cleaning your roof, examine it for signs of damage such as rust, dents, or loose screws. If you notice any problems, address them as soon as possible to avoid further damage.


Conclusion


You can effectively clean your metal roof and keep it looking great for years to come by following these simple steps. Always prioritize safety, use proper equipment and cleaning solutions, and inspect your roof for damage on a regular basis. You can help extend the life of your metal roof and keep it looking like new with a little effort.


FAQs:


Q: How often should a metal roof be cleaned?

A: Metal roofs should be cleaned at least once a year to avoid damage and extend the life of the roof.


A: Is it possible to walk on a metal roof?

A: You can walk on a metal roof, but you must exercise caution to avoid damaging the roof.


A: Can bleach be used to clean a metal roof?

A: Yes, you can use bleach to clean a metal roof, but you must dilute it properly and wear protective equipment.


Comments


bottom of page